| Peer-Reviewed

Employment of the Limit-States Method and the Safety Theory in Geotechnical Design

Received: 3 September 2015     Accepted: 19 September 2015     Published: 9 October 2015
Views:       Downloads:
Abstract

In this paper, a methodology is proposed to apply the Safety Theory in the obtaining of safety factor systems required in the geotechnical design of the foundations using Limit-States Method. The entire mathematical formulation that facilitates the application of the safety theory as well as the integral methodology for the safety factor systems to be used is defined. In addition, a practical example is developed where it is allowed to value the security introduced in the design.

Published in Science Innovation (Volume 3, Issue 6)
DOI 10.11648/j.si.20150306.15
Page(s) 92-99
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Limit-States Method, Safety Factors, Foundation, Safety Theory

References
[1] Álvarez Gil, L. “La estabilidad de cortinas de presas de tierra mediante la solución de los estados tenso-deformacionales y la aplicación de la teoría de seguridad” Dr. Gilberto Quevedo Sotolongo, tutor-TGC; UCLV-(Const.) 127 pp, 1998.
[2] Becker D. E. “Eighteenth Canadian Geotechnical Colloquium: Limit States Design for Foundations. Part I. An overview of the foundation design process.” Canadian Geotechnical Journal 33: 956 – 983. 1996.
[3] Blazquez Martínez, R. Geoestadística aplicada a la mecánica de suelos / R. Martínez Blazquez – CEDEX: Madrid, - 1949 pág. 1984.
[4] González - Cueto, Ana Virginia. “Diseño de cimentaciones superficiales en arenas. Aplicación de la Teoría de Seguridad.” Dr. Ing. Gilberto Quevedo Sotolongo, tutor--TM; UCLV--(Const). 70 pág. 1997.
[5] González - Cueto, Ana Virginia. “Diseño geotécnico de cimentaciones superficiales en arenas.” Dr. Ing. Gilberto Quevedo Sotolongo, tutor--TGC; UCLV--(Const). 132 pág. 2000.
[6] Ibáñez, L. O.. “Análisis del comportamiento geotécnico de las cimentaciones sobre pilotes sometidas a carga axial mediante la modelación matemática.”Dr. Ing. Gilberto Quevedo Sotolongo, tutor--TGC; UCLV--(Const). 113 pág. 2001.
[7] Meyerhof, G. G., “Safety Factors in Soil Mechanics” Canadian Geotechnical Journal. 7: 349 – 355, 1970.
[8] Meyerhof, G. G., “Development of Geotechnical Limit State Design.” Canadian Geotechnical Journal 32: 128 – 136, 1995.
[9] Oliva González, A. “Análisis de la estabilidad y seguridad de taludes” Dr. Celestino González Niciesa, tutor, Dr. Gilberto Quevedo, consultante, -TGC, Universidad de Oviedo, 233pp, 1999.
[10] Orr, T. L; Farrell, E. R. “Geotechnical Design to Eurocode 7” Springer-Verlag. London. 166 pag., 1999
[11] Quevedo Sotolongo, G. “Aplicación de la Teoría de la Seguridad al diseño de las cimentaciones por deformación.” Revista Ingeniería Estructural. 1(IX): 77 - 88; 1988.
[12] Quevedo Sotolongo, G. “Aplicación de la Teoría de la Seguridad al diseño de las cimentaciones por estabilidad” Revista Ingeniería Estructural. 2(IX): 121 - 134; 1988.
[13] Quevedo Sotolongo, G. “Aplicación del método de los estados límites en el diseño de las cimentaciones superficiales.” Revista Ingeniería Estructural. 2(III): 95 - 106; 1987.
[14] Quevedo Sotolongo, G. “Determinación del área de la base de cimentaciones superficiales: Método de cálculo.” UCLV. (Const); 87 pág. 1989.
[15] Quevedo Sotolongo, G. “Optimización y proyección de cimentaciones de edificaciones industriales en las condiciones de Cuba.” – TGC; Moscú (MICI); -- 196 pág. 1987.
[16] Quevedo Sotolongo G,; González-Cueto A. V. “Análisis de la seguridad en el diseño de cimentaciones en arenas. Criterio de estabilidad” Ingeniería Civil No. 119,CEDEX, Madrid, 2000.
Cite This Article
  • APA Style

    Sc. Gilberto Quevedo Sotolongo, Ana V. González – Cueto Vila, Luis O. Ibañez Mora. (2015). Employment of the Limit-States Method and the Safety Theory in Geotechnical Design. Science Innovation, 3(6), 92-99. https://doi.org/10.11648/j.si.20150306.15

    Copy | Download

    ACS Style

    Sc. Gilberto Quevedo Sotolongo; Ana V. González – Cueto Vila; Luis O. Ibañez Mora. Employment of the Limit-States Method and the Safety Theory in Geotechnical Design. Sci. Innov. 2015, 3(6), 92-99. doi: 10.11648/j.si.20150306.15

    Copy | Download

    AMA Style

    Sc. Gilberto Quevedo Sotolongo, Ana V. González – Cueto Vila, Luis O. Ibañez Mora. Employment of the Limit-States Method and the Safety Theory in Geotechnical Design. Sci Innov. 2015;3(6):92-99. doi: 10.11648/j.si.20150306.15

    Copy | Download

  • @article{10.11648/j.si.20150306.15,
      author = {Sc. Gilberto Quevedo Sotolongo and Ana V. González – Cueto Vila and Luis O. Ibañez Mora},
      title = {Employment of the Limit-States Method and the Safety Theory in Geotechnical Design},
      journal = {Science Innovation},
      volume = {3},
      number = {6},
      pages = {92-99},
      doi = {10.11648/j.si.20150306.15},
      url = {https://doi.org/10.11648/j.si.20150306.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20150306.15},
      abstract = {In this paper, a methodology is proposed to apply the Safety Theory in the obtaining of safety factor systems required in the geotechnical design of the foundations using Limit-States Method. The entire mathematical formulation that facilitates the application of the safety theory as well as the integral methodology for the safety factor systems to be used is defined. In addition, a practical example is developed where it is allowed to value the security introduced in the design.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Employment of the Limit-States Method and the Safety Theory in Geotechnical Design
    AU  - Sc. Gilberto Quevedo Sotolongo
    AU  - Ana V. González – Cueto Vila
    AU  - Luis O. Ibañez Mora
    Y1  - 2015/10/09
    PY  - 2015
    N1  - https://doi.org/10.11648/j.si.20150306.15
    DO  - 10.11648/j.si.20150306.15
    T2  - Science Innovation
    JF  - Science Innovation
    JO  - Science Innovation
    SP  - 92
    EP  - 99
    PB  - Science Publishing Group
    SN  - 2328-787X
    UR  - https://doi.org/10.11648/j.si.20150306.15
    AB  - In this paper, a methodology is proposed to apply the Safety Theory in the obtaining of safety factor systems required in the geotechnical design of the foundations using Limit-States Method. The entire mathematical formulation that facilitates the application of the safety theory as well as the integral methodology for the safety factor systems to be used is defined. In addition, a practical example is developed where it is allowed to value the security introduced in the design.
    VL  - 3
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Faculty of Constructions, Central University of Las Villas, Carretera a Camajuaní, Km 5y?, Santa Clara, Villa Clara, Cuba

  • Faculty of Constructions, Central University of Las Villas, Carretera a Camajuaní, Km 5y?, Santa Clara, Villa Clara, Cuba

  • Sections